RF AMP

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
regulaterz
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 42
Joined: Sat Apr 29, 2017 11:17 am

RF AMP

Post by regulaterz » Wed Jul 05, 2017 12:55 am

hi all any Suggestions on a clean 15 to 30 watt RF amp for broadcasting ?. sites links or even diagrams willing to build it but would rather buy it as hands ant as sturdy as they use to be back in the day :lol: 1w drive in 15 to 30w out

thanks for any reply's positive or negative :tup

User avatar
Radio Garfield
big in da game.. trust
big in da game.. trust
Posts: 57
Joined: Mon Jan 30, 2017 7:16 pm

Re: RF AMP

Post by Radio Garfield » Wed Jul 05, 2017 7:36 am

Hi there. In these modern days MOSFET devices are on lead. So my suggestion would be RD30HVF. That is 30 W MOSFET on 12-15 V, with about 1 w input, so perfect match for your needs.

http://pdf1.alldatasheet.com/datasheet- ... 0HVF1.html

It should not be expensive if you want to buy it anyway. Good luck.

regulaterz
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 42
Joined: Sat Apr 29, 2017 11:17 am

Re: RF AMP

Post by regulaterz » Wed Jul 05, 2017 8:47 am

THANK YOU i was thinking this as Technology now is amazing .any suggestions on LINKING as well sorry to be cheeky lol

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: RF AMP

Post by Albert H » Wed Jul 05, 2017 9:10 pm

There are as many ways of linking as there are engineers. I've used Band I, Band III, Band IV, Band V, various SHF and microwave frequencies, 120kHz FM down the mains and even optical links using lasers!

It all depends on how far you need to go, what's in the way and how clandestine it needs to be.....

One station that I worked on in Eastern Europe uploaded their programmes in short digital bursts from their hidden studios. They could upload an hour of stereo programme in under 30 seconds from a small hand-held transmitter squirting the data from a USB stick! One of them just needed to go to within a kilometre of the output site to upload the programme.

That's pretty extreme. In this country, they usually go for the output site first. You'll "lose" the main rig a few times, then they'll get interested in raiding the studio if you persist. You'll also be more likely to get the unfriendly visit if your programming is overtly political or obscene, or if you're causing interference.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

regulaterz
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 42
Joined: Sat Apr 29, 2017 11:17 am

Re: RF AMP

Post by regulaterz » Thu Jul 06, 2017 12:46 pm

that is some proper 007 stuff lol.i done a station 12yrs back with no link and a poor twig running low wattage rig .workd for a year local was noticed and spoke about by local rag and stuff .norm banter like ther lots of interference ect.. probly the antenna lol.then dti came to studio the day we moved only thing up was the poorly made antenna.so wanna relaunch with better set up this time round was thinking a gorilla setup twig and rig in a tree .im in country flat area for miles .THANKS FOR REPLY'S

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: RF AMP

Post by radium98 » Thu Jul 06, 2017 7:17 pm

Hello use for 15w rd15hvf1 200-500 mw input :)

radio pamela
ne guy
ne guy
Posts: 8
Joined: Sat Jul 22, 2017 2:43 pm

Re: RF AMP

Post by radio pamela » Sat Jul 22, 2017 9:07 pm

plenty on ebay of various powers up to around a kilowatt on fm but that is a little risky on that power but boy would you get out cover alot of kent and all london plus a great deal of Essex too :)

User avatar
Maximus
tower block dreamin
tower block dreamin
Posts: 390
Joined: Wed Jan 21, 2015 1:29 pm
Location: Where you don't need licenses

Re: RF AMP

Post by Maximus » Sun Jul 23, 2017 12:15 pm

Been thinking about building a proper 1Kw rig. The transistors (some people call them chips) run on 110v.


Sent from my iPhone using Tapatalk

regulaterz
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 42
Joined: Sat Apr 29, 2017 11:17 am

Re: RF AMP

Post by regulaterz » Thu Jul 27, 2017 8:01 pm

lol with a pirate flag hanging off the mast 1kw off the scale lol

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: RF AMP

Post by Albert H » Fri Jul 28, 2017 1:18 am

1 kW - that's peanuts!

Take a look at https://www.youtube.com/watch?v=qr1xe4aD1mk and https://www.youtube.com/watch?v=gIApfk-MdJk to see what real power is. There's also a view of me (almost 33 years ago - I'm much greyer now) briefly in one of the videos!

Kiss / Energy had an ERP of 1.2 MW - that's 1.2 MILLION Watts. It broadcast from the top of a hill in Co. Monaghan, Eire, and was aimed into the north, towards Belfast and Londonderry. It was a cracking stereo signal in Glasgow and up the west coast of Scotland, too! The medium wave signal was also 40 kW into a good antenna, so that covered a huge area too!
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
Maximus
tower block dreamin
tower block dreamin
Posts: 390
Joined: Wed Jan 21, 2015 1:29 pm
Location: Where you don't need licenses

Re: RF AMP

Post by Maximus » Fri Jul 28, 2017 10:13 am

That's what you call a real pirate station. They must have given the legals a proper run for their money! I remember reading about it being picked up Scotland.


Sent from my iPhone using Tapatalk

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: RF AMP

Post by Albert H » Fri Jul 28, 2017 12:33 pm

Technically, it was a "Border Blaster", broadcasting from one country to another. The Mexican "X" stations were the first of these and back in the 1950s helped to form the style of pop radio that still prevails in much of the world. They were amazingly popular and partly gave Ronan O'Reilly the idea for Radio Caroline. The idea of broadcasting from a ship came from Radio Huaraki in New Zealand (1962), Radio Mercur in Denmark (1958) and Radio Veronica in the Netherlands (1960).
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

regulaterz
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 42
Joined: Sat Apr 29, 2017 11:17 am

Re: RF AMP

Post by regulaterz » Fri Jul 28, 2017 1:47 pm

thats a real bit of kit .it helps with a propa aerial aswell i suppose .what about dab will that git pirates on it at all i wonder

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: RF AMP

Post by Albert H » Fri Jul 28, 2017 3:04 pm

I think that I'll start another thread about DAB. There are exciting developments going on!
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
Maximus
tower block dreamin
tower block dreamin
Posts: 390
Joined: Wed Jan 21, 2015 1:29 pm
Location: Where you don't need licenses

Re: RF AMP

Post by Maximus » Fri Jul 28, 2017 3:47 pm

Apparently the Mexicans used to float their TV and radio aerials really high using helium balloons to reach into the US


Sent from my iPhone using Tapatalk

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: RF AMP

Post by Albert H » Sat Jul 29, 2017 1:25 am

I've used kites and helium balloons to put up temporary medium wave aerials. If there's little wind, it can really work well.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
thewisepranker
proppa neck!
proppa neck!
Posts: 568
Joined: Fri Aug 22, 2014 12:53 pm
Location: Brighton

Re: RF AMP

Post by thewisepranker » Sat Jul 29, 2017 9:23 pm

Helium's a strange one. It shouldn't be as cheap as it is - far too rare!

User avatar
thewisepranker
proppa neck!
proppa neck!
Posts: 568
Joined: Fri Aug 22, 2014 12:53 pm
Location: Brighton

Re: RF AMP

Post by thewisepranker » Sat Jul 29, 2017 9:25 pm

Albert H wrote: Fri Jul 28, 2017 1:18 am There's also a view of me (almost 33 years ago - I'm much greyer now) briefly in one of the videos!
5:22?

Shedbuilt
no manz can test innit
no manz can test innit
Posts: 225
Joined: Tue Dec 02, 2014 11:03 am

Re: RF AMP

Post by Shedbuilt » Mon Jul 31, 2017 12:19 pm

thewisepranker wrote: Sat Jul 29, 2017 9:25 pm
Albert H wrote: Fri Jul 28, 2017 1:18 am There's also a view of me (almost 33 years ago - I'm much greyer now) briefly in one of the videos!
5:22?
Doesn't look or sound right to me, but my memory may be playing tricks. I'm thinking perhaps back of head shot at 6:48....

User avatar
thewisepranker
proppa neck!
proppa neck!
Posts: 568
Joined: Fri Aug 22, 2014 12:53 pm
Location: Brighton

Re: RF AMP

Post by thewisepranker » Mon Jul 31, 2017 12:32 pm

That's the same guy, wearing the same jumper as 1:42. In fact, 6:48 is a recycled clip which also appears at 1:40.

Post Reply