Hack RF negative press in Daily Fail
-
- tower block dreamin
- Posts: 342
- Joined: Tue Sep 16, 2014 8:21 pm
-
- proppa neck!
- Posts: 2777
- Joined: Tue Apr 05, 2016 1:23 am
Re: Hack RF negative press in Daily Fail
I have three Hack RF One boxes here on the bench, generating three DAB multiplexes. All these things are is software-defined radio transceivers. They can be configured to work anywhere from about 150kHz to 1 GHz. I've used them as test sources for receiver alignment, as the local oscillator during receiver development, for generating AM, SSB and FM signals and many more uses too numerous to remember.
The clueless Daily Mail are trying to make a story out of nothing - as usual.
The clueless Daily Mail are trying to make a story out of nothing - as usual.
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- no manz can test innit
- Posts: 137
- Joined: Thu Sep 11, 2014 10:01 pm
Re: Hack RF negative press in Daily Fail
Albert id love to see any pics or vids of this.Albert H wrote: ↑Thu May 25, 2017 11:54 pm I have three Hack RF One boxes here on the bench, generating three DAB multiplexes. All these things are is software-defined radio transceivers. They can be configured to work anywhere from about 150kHz to 1 GHz. I've used them as test sources for receiver alignment, as the local oscillator during receiver development, for generating AM, SSB and FM signals and many more uses too numerous to remember.
The clueless Daily Mail are trying to make a story out of nothing - as usual.
Are you using ODR software, and if so what are you running it on, debain raspberry etc??
In the next couple of months im going to try a little test setup.
Id love to see some pics as you have it set up and running, topman
- McDonalds
- tower block dreamin
- Posts: 342
- Joined: Fri Aug 29, 2014 12:20 pm
- Location: Essex UK
- Contact:
Re: Hack RF negative press in Daily Fail
I would like to buy one but seem very pricey and for the price you could get an FM rig for it.
-
- proppa neck!
- Posts: 2777
- Joined: Tue Apr 05, 2016 1:23 am
Re: Hack RF negative press in Daily Fail
You're missing the point! The Hack RF One is a very general solution to generating (and receiving) signals over a wide range of frequencies.
I'll snap a couple of pics of the lash-up later on. I'm building some DAB+ modulators into 19" rack boxes. The boxes actually contain industrial computers, and I've added soundcards and the Raspberry Pi encoders and the RF parts into the huge air-conditioned voids above the motherboards. These will be shipped to southern Europe next week.
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
- radionortheast
- proppa neck!
- Posts: 500
- Joined: Wed Sep 09, 2015 1:38 pm
Re: Hack RF negative press in Daily Fail
sounds like a box of sprogs!The Hack RF One is a very general solution to generating (and receiving) signals over a wide range of frequencies.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
-
- no manz can test innit
- Posts: 142
- Joined: Tue Aug 11, 2015 11:17 am
Re: Hack RF negative press in Daily Fail
Interested in grabbing one myself.. Be good to scan network traffic at radio tower's etc.
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
-
- who u callin ne guy bruv
- Posts: 24
- Joined: Sun Feb 01, 2015 4:05 pm
Re: Hack RF negative press in Daily Fail
Are you using the Great Scott hackrf or the half price Chinese jobs?
-
- proppa neck!
- Posts: 2777
- Joined: Tue Apr 05, 2016 1:23 am
Re: Hack RF negative press in Daily Fail
The ones that I've boxed up in the 19" rack boxes are original "Great Scott" ones. I've just got some clones of them from Shenzhen for $45 each. If they work OK, we have cheap DAB!!!
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- who u callin ne guy bruv
- Posts: 24
- Joined: Sun Feb 01, 2015 4:05 pm
Re: Hack RF negative press in Daily Fail
$45 Nice one! Let us now how they perform or don't. ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- proppa neck!
- Posts: 2777
- Joined: Tue Apr 05, 2016 1:23 am
Re: Hack RF negative press in Daily Fail
There is also the $250 EasyDAB v2, which moves much of the processing overhead to an FPGA and gives a few milliwatts at the output frequency. This is a really elegant solution (if slightly pricier), but it eliminates a lot of the hassles and reduces the amount of computing required.
We've tried one of these out in a test site with a somewhat iffy home-made broadband FET PA tacked on to the end. Once we got the filtering sorted out to eliminate the crud (and I turned down the output power of the EasyDAB board), we had a superb DAB+ multiplex with better than expected coverage. The whole rig - including the soundcards, Raspberry Pis, boxes, connectors, power supplies, aerials and cables came to under €2000.
We've tried one of these out in a test site with a somewhat iffy home-made broadband FET PA tacked on to the end. Once we got the filtering sorted out to eliminate the crud (and I turned down the output power of the EasyDAB board), we had a superb DAB+ multiplex with better than expected coverage. The whole rig - including the soundcards, Raspberry Pis, boxes, connectors, power supplies, aerials and cables came to under €2000.
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- no manz can test innit
- Posts: 111
- Joined: Mon Feb 23, 2015 7:07 pm
Re: Hack RF negative press in Daily Fail
Albert, did you ever get to test out the Chinese clones and if so how did it perform. Is it worth purchasing one or not ?