Mrf9180 kit passives value identification

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 3:31 pm

does it not spit out spuri?
Top
User avatar
BriansBrain
proppa neck!
proppa neck!
Posts: 516
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:
Contact BriansBrain

Re: Mrf9180 kit passives value identification

Post by BriansBrain » Thu Mar 26, 2020 4:14 pm

Bton-FM wrote: ↑Thu Mar 26, 2020 3:31 pm does it not spit out spuri?
Verry Little :whistle
Image The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 4:15 pm

Ok will cop one
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 4:18 pm

BriansBrain wrote: ↑Thu Mar 26, 2020 3:20 pm
teckniqs wrote: ↑Thu Mar 26, 2020 2:37 pm 11 quid here: https://www.ebay.co.uk/itm//323418070567
:lol:

For me that would be 12.08 EUR + 21.70 EUR post = Total of 33.78 Euros

+ Then I would have to pay import TAX because UK in not in the union now :P

24V @ 10A from greatshopsaving on ebay.jpg

24V @ 10A from greatshopsaving on ebay - Cost.jpg

I will stick with stuff from China :tup
Lol I thought you already had one so I was just pointing it out for Bton
Top
User avatar
BriansBrain
proppa neck!
proppa neck!
Posts: 516
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:
Contact BriansBrain

Re: Mrf9180 kit passives value identification

Post by BriansBrain » Thu Mar 26, 2020 4:42 pm

teckniqs wrote: ↑Thu Mar 26, 2020 4:18 pm
BriansBrain wrote: ↑Thu Mar 26, 2020 3:20 pm
teckniqs wrote: ↑Thu Mar 26, 2020 2:37 pm 11 quid here: https://www.ebay.co.uk/itm//323418070567
:lol:

For me that would be 12.08 EUR + 21.70 EUR post = Total of 33.78 Euros

+ Then I would have to pay import TAX because UK in not in the union now :P

24V @ 10A from greatshopsaving on ebay.jpg

24V @ 10A from greatshopsaving on ebay - Cost.jpg

I will stick with stuff from China :tup
Lol I thought you already had one so I was just pointing it out for Bton
Yeah... :lol: I have many :tup
I was just suggesting they will be cheaper direct from a supplier China if you can wait :roll:
Image The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.
Top
User avatar
BriansBrain
proppa neck!
proppa neck!
Posts: 516
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:
Contact BriansBrain

Re: Mrf9180 kit passives value identification

Post by BriansBrain » Thu Mar 26, 2020 6:03 pm

The 99.6MHz signal is from SER my neighbour, 120Mt away.
It's a legal station running at 4Kw pointing directly at me :P
SER Antenna 99.6MHz.jpg
Measured in Brian's Studio/Workshop - 7M directly below his antenna.
Siglent - Antenna in Brians Studio.jpg
:tup
You do not have the required permissions to view the files attached to this post.
Image The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 7:29 pm

The soldering iron I’m currently using is apparently 60w but it’s struggling to even melt the solder on the ground plane.Should I get a beefier one ?This ones a Chinese temp controlled one By the way.I also have the fat weller iron but the tips F£cked so it’s a bit of a wind up!!
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 7:35 pm

BriansBrain wrote: ↑Thu Mar 26, 2020 4:42 pm
teckniqs wrote: ↑Thu Mar 26, 2020 4:18 pm
BriansBrain wrote: ↑Thu Mar 26, 2020 3:20 pm

:lol:

For me that would be 12.08 EUR + 21.70 EUR post = Total of 33.78 Euros

+ Then I would have to pay import TAX because UK in not in the union now :P

24V @ 10A from greatshopsaving on ebay.jpg

24V @ 10A from greatshopsaving on ebay - Cost.jpg

I will stick with stuff from China :tup
Lol I thought you already had one so I was just pointing it out for Bton
Yeah... :lol: I have many :tup
I was just suggesting they will be cheaper direct from a supplier China if you can wait :roll:
That was the lowest priced one on eBay from all countries but from here in the UK (the same country Bton FM and myself are both at...)
Last edited by teckniqs on Thu Mar 26, 2020 7:37 pm, edited 1 time in total.
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 7:36 pm

teckniqs wrote: ↑Thu Mar 26, 2020 7:35 pm
BriansBrain wrote: ↑Thu Mar 26, 2020 4:42 pm
teckniqs wrote: ↑Thu Mar 26, 2020 4:18 pm

Lol I thought you already had one so I was just pointing it out for Bton
Yeah... :lol: I have many :tup
I was just suggesting they will be cheaper direct from a supplier China if you can wait :roll:
That was the lowest priced one on eBay from all countries but from her in the UK (the same country Bton FM and myself are both at...)
That’s why I’m skeptical brain ;) :mrgreen:
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 7:37 pm

Bton-FM wrote: ↑Thu Mar 26, 2020 7:29 pm The soldering iron I’m currently using is apparently 60w but it’s struggling to even melt the solder on the ground plane.Should I get a beefier one ?This ones a Chinese temp controlled one By the way.I also have the fat weller iron but the tips F£cked so it’s a bit of a wind up!!
You want one of those dirty great chunky 100w fuckers or a soldering gun....
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 7:38 pm

teckniqs wrote: ↑Thu Mar 26, 2020 7:37 pm
Bton-FM wrote: ↑Thu Mar 26, 2020 7:29 pm The soldering iron I’m currently using is apparently 60w but it’s struggling to even melt the solder on the ground plane.Should I get a beefier one ?This ones a Chinese temp controlled one By the way.I also have the fat weller iron but the tips F£cked so it’s a bit of a wind up!!
You want one of those dirty great chunky 100w fuckers or a soldering gun....
The weller is 75 watts shall I just replace the tip and use that ?
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 7:51 pm

Something like this should do the job.... :tup

Image
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 8:09 pm

51340DC5-271A-43F5-96DC-AAD15F14EFE0.jpeg
This is the one I’ve got I’ll have to get a replacement tip although the only ones I can find are the bent one.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 8:49 pm

If you can undo that screw and slide the tip a lot further down it will make it much hotter.
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 8:56 pm

This Is the one I’m talking about that can’t solder ground planes by the way :
You do not have the required permissions to view the files attached to this post.
Top
User avatar
BriansBrain
proppa neck!
proppa neck!
Posts: 516
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:
Contact BriansBrain

Re: Mrf9180 kit passives value identification

Post by BriansBrain » Thu Mar 26, 2020 9:06 pm

This is my big monster :lol:

ebay £11.80 post FREE :whistle

https://www.ebay.co.uk/itm/220V-100W-15 ... WAQvFuw5OA
HB-501 Soldering Ion.jpg
HB-501 Soldering Ion-2-S.jpg
:tup
You do not have the required permissions to view the files attached to this post.
Image The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.
Top
User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 kit passives value identification

Post by Bton-FM » Thu Mar 26, 2020 9:10 pm

haha brian you really are rockin the chines gear!! :lol: :tup
Did you use that to do the smd soldering on the amp? :whistle
Top
User avatar
BriansBrain
proppa neck!
proppa neck!
Posts: 516
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:
Contact BriansBrain

Re: Mrf9180 kit passives value identification

Post by BriansBrain » Thu Mar 26, 2020 9:56 pm

Bton-FM wrote: ↑Thu Mar 26, 2020 9:10 pm Did you use that to do the smd soldering on the amp? :whistle
Shit no :lol:

I just thought I would show you my big one :roll:
Image The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 10:37 pm

BriansBrain wrote: ↑Thu Mar 26, 2020 9:06 pm This is my big monster :lol:

ebay £11.80 post FREE :whistle

https://www.ebay.co.uk/itm/220V-100W-15 ... WAQvFuw5OA

HB-501 Soldering Ion.jpg

HB-501 Soldering Ion-2-S.jpg

:tup
Nice, that chunky red one is 200w.
Top
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3251
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 kit passives value identification

Post by teckniqs » Thu Mar 26, 2020 10:41 pm

Bton-FM wrote: ↑Thu Mar 26, 2020 8:56 pm This Is the one I’m talking about that can’t solder ground planes by the way :
I'm not surprised...
Top
Post Reply

Return to “Anorak Corner”