Psu recommendations

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
Uksoundz
no manz can test innit
no manz can test innit
Posts: 127
Joined: Sat Nov 15, 2014 9:42 am

Psu recommendations

Post by Uksoundz » Sat Jan 03, 2026 2:15 pm

I’ve come across an amplifier which requires 17.5vdc and around 12 amps. Does anyone know of a decent psu that would work with this? Most seem to be around 12v or 24v and the bench ones only go up to 10amp unless willing to remortgage the house.

King Croccy
big in da game.. trust
big in da game.. trust
Posts: 66
Joined: Sat Aug 26, 2023 3:20 pm

Re: Psu recommendations

Post by King Croccy » Sat Jan 03, 2026 2:56 pm

You can buy tons of 18v switch mode power supplies on Aliexpress. It will have a pot on it that you can turn down to 17.5V.

Seems a strange input voltage for an amp though, must be Chinese? lol

oazz
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 41
Joined: Sun Aug 23, 2020 4:20 pm

Re: Psu recommendations

Post by oazz » Sat Jan 03, 2026 3:37 pm


User avatar
radionortheast
proppa neck!
proppa neck!
Posts: 1233
Joined: Wed Sep 09, 2015 1:38 pm

Re: Psu recommendations

Post by radionortheast » Sat Jan 03, 2026 7:26 pm

I don’t know sounds like the mean well power supply blew up from an eariler thread, what it was powering I don’t know. My guess is your best buying from a proper electronics supplier, it might of been bigclive who said it, sure other people watch his stuff, he goes into great detail about what component does what, don’t think i’ve ever found in a video before, or someone who does this, why a capacitor is there. This is only a led power supply below, shows you what things should be there, could likely be scaled up, will be useful to know for powering low power things maybe bigger things too. My own guess with this is and I don't know much about it, it might be a false economy buying a cheap one, risk damaging the amp or blowing something, unless you've got some means of testing it with a load, whether it can handle it.


Post Reply