Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 3:31 pm
does it not spit out spuri?
Verry Little
Mrf9180 kit passives value identification
Page 2 of 3
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 4:14 pm
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 4:15 pm
Ok will cop one
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 4:18 pm
Lol I thought you already had one so I was just pointing it out for BtonBriansBrain wrote: ↑Thu Mar 26, 2020 3:20 pm
For me that would be 12.08 EUR + 21.70 EUR post = Total of 33.78 Euros
+ Then I would have to pay import TAX because UK in not in the union now
24V @ 10A from greatshopsaving on ebay.jpg
24V @ 10A from greatshopsaving on ebay - Cost.jpg
I will stick with stuff from China
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 4:42 pm
Yeah...teckniqs wrote: ↑Thu Mar 26, 2020 4:18 pmLol I thought you already had one so I was just pointing it out for BtonBriansBrain wrote: ↑Thu Mar 26, 2020 3:20 pm
For me that would be 12.08 EUR + 21.70 EUR post = Total of 33.78 Euros
+ Then I would have to pay import TAX because UK in not in the union now
24V @ 10A from greatshopsaving on ebay.jpg
24V @ 10A from greatshopsaving on ebay - Cost.jpg
I will stick with stuff from China
I have many I was just suggesting they will be cheaper direct from a supplier China if you can wait
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 6:03 pm
The 99.6MHz signal is from SER my neighbour, 120Mt away.
It's a legal station running at 4Kw pointing directly at me
Measured in Brian's Studio/Workshop - 7M directly below his antenna.
It's a legal station running at 4Kw pointing directly at me
Measured in Brian's Studio/Workshop - 7M directly below his antenna.
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 7:29 pm
The soldering iron I’m currently using is apparently 60w but it’s struggling to even melt the solder on the ground plane.Should I get a beefier one ?This ones a Chinese temp controlled one By the way.I also have the fat weller iron but the tips F£cked so it’s a bit of a wind up!!
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 7:35 pm
That was the lowest priced one on eBay from all countries but from here in the UK (the same country Bton FM and myself are both at...)BriansBrain wrote: ↑Thu Mar 26, 2020 4:42 pmYeah...teckniqs wrote: ↑Thu Mar 26, 2020 4:18 pmLol I thought you already had one so I was just pointing it out for BtonBriansBrain wrote: ↑Thu Mar 26, 2020 3:20 pm
For me that would be 12.08 EUR + 21.70 EUR post = Total of 33.78 Euros
+ Then I would have to pay import TAX because UK in not in the union now
24V @ 10A from greatshopsaving on ebay.jpg
24V @ 10A from greatshopsaving on ebay - Cost.jpg
I will stick with stuff from China
I was just suggesting they will be cheaper direct from a supplier China if you can wait
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 7:36 pm
That’s why I’m skeptical brainteckniqs wrote: ↑Thu Mar 26, 2020 7:35 pmThat was the lowest priced one on eBay from all countries but from her in the UK (the same country Bton FM and myself are both at...)BriansBrain wrote: ↑Thu Mar 26, 2020 4:42 pmYeah...
I was just suggesting they will be cheaper direct from a supplier China if you can wait
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 7:37 pm
You want one of those dirty great chunky 100w fuckers or a soldering gun....Bton-FM wrote: ↑Thu Mar 26, 2020 7:29 pm The soldering iron I’m currently using is apparently 60w but it’s struggling to even melt the solder on the ground plane.Should I get a beefier one ?This ones a Chinese temp controlled one By the way.I also have the fat weller iron but the tips F£cked so it’s a bit of a wind up!!
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 7:38 pm
The weller is 75 watts shall I just replace the tip and use that ?teckniqs wrote: ↑Thu Mar 26, 2020 7:37 pmYou want one of those dirty great chunky 100w fuckers or a soldering gun....Bton-FM wrote: ↑Thu Mar 26, 2020 7:29 pm The soldering iron I’m currently using is apparently 60w but it’s struggling to even melt the solder on the ground plane.Should I get a beefier one ?This ones a Chinese temp controlled one By the way.I also have the fat weller iron but the tips F£cked so it’s a bit of a wind up!!
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 7:51 pm
Something like this should do the job....
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 8:09 pm
This is the one I’ve got I’ll have to get a replacement tip although the only ones I can find are the bent one.
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 8:49 pm
If you can undo that screw and slide the tip a lot further down it will make it much hotter.
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 8:56 pm
This Is the one I’m talking about that can’t solder ground planes by the way :
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 9:06 pm
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 9:10 pm
haha brian you really are rockin the chines gear!!
Did you use that to do the smd soldering on the amp?
Did you use that to do the smd soldering on the amp?
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 9:56 pm
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 10:37 pm
Nice, that chunky red one is 200w.BriansBrain wrote: ↑Thu Mar 26, 2020 9:06 pm This is my big monster
ebay £11.80 post FREE
https://www.ebay.co.uk/itm/220V-100W-15 ... WAQvFuw5OA
HB-501 Soldering Ion.jpg
HB-501 Soldering Ion-2-S.jpg
Re: Mrf9180 kit passives value identification
Posted: Thu Mar 26, 2020 10:41 pm