Page 1 of 1

Saltwater dummy loads

Posted: Tue Aug 02, 2022 8:41 pm
by Maximus
Hi, has anyone used one of these before. Seems crude but effective.

https://vm.tiktok.com/ZMNqCgdWB/?k=1


Sent from my iPhone using Tapatalk

Re: Saltwater dummy loads

Posted: Wed Aug 03, 2022 9:04 am
by teckniqs
Maximus wrote: Tue Aug 02, 2022 8:41 pm crude but effective.
Image

Re: Saltwater dummy loads

Posted: Wed Aug 03, 2022 9:16 am
by reverend
What on Earth is that that Mr Maxwell is holding? Is it a Turbo-Encabulator?

Re: Saltwater dummy loads

Posted: Wed Aug 03, 2022 7:30 pm
by mpx
Looks like a flux capacitor attached to a Bowman PA board :lol: looks like Theresa May on the left, they caught her on the roof

Re: Saltwater dummy loads

Posted: Wed Aug 03, 2022 10:51 pm
by Bton-FM
Shout out 2 Barry M on dis wan!

I think it’s crude and …….ineffective. Your rig will be ineffective soon after as well. :rip

Re: Saltwater dummy loads

Posted: Thu Aug 04, 2022 4:49 am
by Albert H
Maximus wrote: Tue Aug 02, 2022 8:41 pm Hi, has anyone used one of these before. Seems crude but effective.
https://vm.tiktok.com/ZMNqCgdWB/?k=1
Completely useless for RF work. The load impedance will NOT be stable.

Re: Saltwater dummy loads

Posted: Thu Aug 04, 2022 11:13 am
by Shedbuilt
teckniqs wrote: Wed Aug 03, 2022 9:04 am
Maximus wrote: Tue Aug 02, 2022 8:41 pm crude but effective.
Image

Re: Saltwater dummy loads

Posted: Thu Aug 04, 2022 2:25 pm
by XXL
What is that red thing it’s on and how would that be secured in place ? Also I though all rf gear had to be in a metal case surrounded by ground?

Re: Saltwater dummy loads

Posted: Thu Aug 04, 2022 5:21 pm
by Bton-FM
XXL wrote: Thu Aug 04, 2022 2:25 pm What is that red thing it’s on and how would that be secured in place ? Also I though all rf gear had to be in a metal case surrounded by ground?
It’s a traffic cone to lodge it in the pipe!

Re: Saltwater dummy loads

Posted: Sat Aug 06, 2022 12:31 pm
by teckniqs
Haha now look what I've gone and started. :whistle

....I was also wondering what the traffic cone was all about and any idea what that red thing is attached to the piece of wood?

If I was to take a guess I'd say this was probably Vibes FM 93.8 @Bannerman House, Oval/Vauxhall
or Girls FM 106.6/106.8 @Sirinham Point, Oval/Kennington

Re: Saltwater dummy loads

Posted: Sat Aug 06, 2022 1:49 pm
by yellowbeard
The red thing is a fat electrolytic, the red is actually insulating tape securing it to the wood, the bridge is under the guy's hand and there's a toroidal transformer at the bottom end - that plank is the power supply section! The thing that got me is the way the transmitter is being held up at an angle makes it look like it's mounted in a plastic sandwich box. Now the second photo - what brand of bickies is that box from? Looks like they might've been expensive ones, the box is all low profile and shit... :lol:

Re: Saltwater dummy loads

Posted: Sat Aug 06, 2022 2:32 pm
by teckniqs
yellowbeard wrote: Sat Aug 06, 2022 1:49 pm The red thing is a fat electrolytic, the red is actually insulating tape securing it to the wood, the bridge is under the guy's hand and there's a toroidal transformer at the bottom end - that plank is the power supply section! The thing that got me is the way the transmitter is being held up at an angle makes it look like it's mounted in a plastic sandwich box. Now the second photo - what brand of bickies is that box from? Looks like they might've been expensive ones, the box is all low profile and shit... :lol:
Ahh yes I see it all clearly now that you've pointed them out. :tup