mc12017 and mc145152

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
Shedbuilt
no manz can test innit
no manz can test innit
Posts: 237
Joined: Tue Dec 02, 2014 11:03 am

Re: mc12017 and mc145152

Post by Shedbuilt » Sat Jan 07, 2017 11:06 pm

This might well work; with the SW input set to high.
http://www.ebay.com/itm/SA701-128-129-6 ... Ciid%253A1
Top
radium98
proppa neck!
proppa neck!
Posts: 973
Joined: Fri Aug 26, 2016 7:01 pm

Re: mc12017 and mc145152

Post by radium98 » Sun Jan 08, 2017 7:37 am

Hello and thanks for both of you Shedbuilt and shorty yes today i will try what shedbuilt say to me about one output and pin 6 shorted to ground and frequency to lock on 96 will do and report back
thanks yellowbeard .
but 1question is pin 6 must always after the test be coupled to ground or only in the test process ?
Top
shorty
no manz can test innit
no manz can test innit
Posts: 126
Joined: Thu Sep 04, 2014 11:20 am

Re: mc12017 and mc145152

Post by shorty » Sun Jan 08, 2017 11:17 am

Looking at the schematic radium posted and the sip pinout, it looks to be pin1 Ground, pin2 out1 not connected, pin 3 f out, pin4 +5v, pin5 f in, pin6 coupled to ground.
Top
radium98
proppa neck!
proppa neck!
Posts: 973
Joined: Fri Aug 26, 2016 7:01 pm

Re: mc12017 and mc145152

Post by radium98 » Wed Jan 25, 2017 4:10 pm

congratulation for the new board layout.
Top
Post Reply

Return to “Anorak Corner”