Directional coupler
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Directional coupler
Any Recommendations for a cheap directional coupler (<£100) or should I diy it? It needs to be able to cover up to a few hundred Mhz so I can test for harmonics.
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Directional coupler
Rigmo do you have any specific recommendations? What coupler are you using?
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Directional coupler
Anyone else got any advice on decent couplers?
- BriansBrain
- proppa neck!
- Posts: 521
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: Directional coupler
I have one of these
it's excellent...
However I wish it was 30db and not 60db

it's excellent...

However I wish it was 30db and not 60db

You do not have the required permissions to view the files attached to this post.

- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Directional coupler
Did you get it on ebay?BriansBrain wrote: ↑Mon May 04, 2020 7:11 pm I have one of these![]()
Bi Directional Coupler 80MHz to 1000MHz 60dB 200W Connecticut Microwave 441270-S.jpg
it's excellent...![]()
However I wish it was 30db and not 60db![]()
-
- Neckmin
- Posts: 338
- Joined: Fri Oct 17, 2014 10:35 am
Re: Directional coupler
If you can get a bunch of 3db couplers and bandpass filters - you can cascade them to combine transmitters into a single antenna system
- BriansBrain
- proppa neck!
- Posts: 521
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: Directional coupler
Yes...Bton-FM wrote: ↑Mon May 04, 2020 8:40 pmDid you get it on ebay?BriansBrain wrote: ↑Mon May 04, 2020 7:11 pm I have one of these![]()
Bi Directional Coupler 80MHz to 1000MHz 60dB 200W Connecticut Microwave

6 months ago... it cost €48


- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Directional coupler
Has anyone had success with building their own coupler ?
I also saw on Dutch RF Shop there is a coupler that is rated 800-2500mhz.In the description it said that the coupler is fine on 100mhz. I emailed them and they said that they have used it to test transmitters but they first worked out the difference in coupling below the recommended frequency range and then corrected the readings from the analyser.
On DRFS these are €17.95 but the same ones are on eBay for under a score....sounds like it’s worth a go! And if it doesn’t work out then at least you get 3 n connectors and a die cast box!
Here it is: https://dutchrfshop.nl/en/hf/607-direct ... upler.html
I also saw on Dutch RF Shop there is a coupler that is rated 800-2500mhz.In the description it said that the coupler is fine on 100mhz. I emailed them and they said that they have used it to test transmitters but they first worked out the difference in coupling below the recommended frequency range and then corrected the readings from the analyser.
On DRFS these are €17.95 but the same ones are on eBay for under a score....sounds like it’s worth a go! And if it doesn’t work out then at least you get 3 n connectors and a die cast box!



Here it is: https://dutchrfshop.nl/en/hf/607-direct ... upler.html
- rigmo
- proppa neck!
- Posts: 532
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Directional coupler
Mini Circuits ZFDC-20-400 1GHz 20dB Directional Coupler Type N ans BIRD Bird 4275-020 Variable RF Sampler 20-1000MHz
this is names I only trust in accurate measurement
BIRD and Mini Circuits! any connector... sma bmc N
this is names I only trust in accurate measurement
BIRD and Mini Circuits! any connector... sma bmc N
- rigmo
- proppa neck!
- Posts: 532
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Directional coupler
for play ... not professional...
- BriansBrain
- proppa neck!
- Posts: 521
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: Directional coupler
Thanks for the info

I have seen this second hand on ebay and ordered one

What sort of power do you think it wit handle

You do not have the required permissions to view the files attached to this post.

- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Directional coupler
it can only handle about a watt I thinkBriansBrain wrote: ↑Wed May 13, 2020 2:18 pmThanks for the info![]()
I have seen this second hand on ebay and ordered one![]()
Mini Circuits 1-1000MHz 30dB Directional Coupler ZFDC-20-400.jpg
What sort of power do you think it wit handle![]()
- BriansBrain
- proppa neck!
- Posts: 521
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: Directional coupler
1 watt = good enough for LPF trimmingBton-FM wrote: ↑Wed May 13, 2020 4:12 pmit can only handle about a watt I thinkBriansBrain wrote: ↑Wed May 13, 2020 2:18 pmThanks for the info![]()
I have seen this second hand on ebay and ordered one![]()
Mini Circuits 1-1000MHz 30dB Directional Coupler ZFDC-20-400.jpg
What sort of power do you think it wit handle![]()

