150W AMP PCB's

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
User avatar
rigmo
proppa neck!
proppa neck!
Posts: 532
Joined: Wed Jan 30, 2019 9:35 pm

Re: 150W AMP PCB's

Post by rigmo » Mon Dec 26, 2022 2:08 pm

Bton-FM wrote: ↑Mon Jul 12, 2021 3:36 pm May I suggest you use the Elenos circuit for the BLF177 rather than the Phillips test circuit? It's broadband so you don't need to worry about trimmers failing.

The only thing it doesn't include is a low pass filter but it's easy to add one on.
You do not have the required permissions to view the files attached to this post.
Top
Albert H
proppa neck!
proppa neck!
Posts: 2957
Joined: Tue Apr 05, 2016 1:23 am

Re: 150W AMP PCB's

Post by Albert H » Tue Dec 27, 2022 2:42 am

There are a couple of other FETs that will work in that board too, with very minor changes. I used to build them with SRF1616 or MRF151 (not the "G" version obviously). My version of the board was slightly narrower, but longer to accommodate a 2-stage lowpass filter and a screen to separate the filter coils from the rest of the board.
"Why is my rig humming?"
"Because it doesn't know the words!" ;)
Top
Post Reply

Return to “Anorak Corner”