where can I get hex file to control this BH!415F pll
-
- ne guy
- Posts: 4
- Joined: Fri Jul 23, 2021 9:35 am
where can I get hex file to control this BH!415F pll
You do not have the required permissions to view the files attached to this post.
- radionortheast
- proppa neck!
- Posts: 998
- Joined: Wed Sep 09, 2015 1:38 pm
Re: where can I get hex file to control this BH!415F pll
suppose it will tune to all frequencies with it been a 1415f, 17f dose't tune to all frequencies
you can injet your own stereo into them too, with this one i'm not sure

-
- ne guy
- Posts: 4
- Joined: Fri Jul 23, 2021 9:35 am
Re: where can I get hex file to control this BH!415F pll
It is a 1415f pll, it has 87.5Mhz to 108Mhz and left and right input for stereo Fm
-
- proppa neck!
- Posts: 982
- Joined: Fri Aug 26, 2016 7:01 pm
Re: where can I get hex file to control this BH!415F pll
Then why not asking that turkish guy
-
- no manz can test innit
- Posts: 113
- Joined: Tue Mar 07, 2017 8:57 pm
Re: where can I get hex file to control this BH!415F pll
I remember the old Freddos'page had a project with the 1415, lcd and pic16f628
There is a mirror of that web somewhere. With hex and all. Maybe only adapt some wiring it may work without getting the exact firmware for that board.
There is a mirror of that web somewhere. With hex and all. Maybe only adapt some wiring it may work without getting the exact firmware for that board.
- yellowbeard
- tower block dreamin
- Posts: 354
- Joined: Wed Jul 08, 2015 5:40 am
Re: where can I get hex file to control this BH!415F pll
Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.

- radionortheast
- proppa neck!
- Posts: 998
- Joined: Wed Sep 09, 2015 1:38 pm
-
- no manz can test innit
- Posts: 113
- Joined: Tue Mar 07, 2017 8:57 pm
Re: where can I get hex file to control this BH!415F pll
There is another one! I found what I remembered.yellowbeard wrote: ↑Thu Jul 03, 2025 6:25 pm Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.![]()
If you go to the tab "transmitters" there is again the single chip BH1415 project, but the layout has the PIC16F628 and there is hex file for both 8x2 and 16x2 LCD display.
-
- ne guy
- Posts: 4
- Joined: Fri Jul 23, 2021 9:35 am
-
- ne guy
- Posts: 4
- Joined: Fri Jul 23, 2021 9:35 am
Re: where can I get hex file to control this BH!415F pll
Thanks a lot, this will be helpful, I can do rewiring of data lines to make workKrakatoa wrote: ↑Sat Jul 05, 2025 8:26 amThere is another one! I found what I remembered.yellowbeard wrote: ↑Thu Jul 03, 2025 6:25 pm Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.![]()
If you go to the tab "transmitters" there is again the single chip BH1415 project, but the layout has the PIC16F628 and there is hex file for both 8x2 and 16x2 LCD display.