PCS SE3000AN+ Revisited

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
Hugh
ne guy
ne guy
Posts: 8
Joined: Wed Mar 15, 2023 9:34 am

PCS SE3000AN+ Revisited

Post by Hugh » Sat Jun 22, 2024 9:44 am

Hi Folks, I am servicing one of these doodads at component level, it is a compressor/ low pass filter/ Stereo generator PCB from ~2000. One of 2 inductors in the MPX filter has gone o/c.; the one nearest "Max Link Socket". No markings visible. Does anyone have access to a circuit, what's it's value? Cheers all.

Albert H
proppa neck!
proppa neck!
Posts: 2957
Joined: Tue Apr 05, 2016 1:23 am

Re: PCS SE3000AN+ Revisited

Post by Albert H » Sun Jun 23, 2024 2:40 am

Send Mighty (at PCS) an email. He's a friendly guy and will tell you what you need to know.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

Hugh
ne guy
ne guy
Posts: 8
Joined: Wed Mar 15, 2023 9:34 am

Re: PCS SE3000AN+ Revisited

Post by Hugh » Mon Jun 24, 2024 12:32 am

Thanks Albert, I shall do that.
You've done superb work on compressors Sir.

User avatar
rigmo
proppa neck!
proppa neck!
Posts: 532
Joined: Wed Jan 30, 2019 9:35 pm

Re: PCS SE3000AN+ Revisited

Post by rigmo » Mon Jun 24, 2024 11:49 pm


User avatar
radionortheast
proppa neck!
proppa neck!
Posts: 882
Joined: Wed Sep 09, 2015 1:38 pm

Re: PCS SE3000AN+ Revisited

Post by radionortheast » Tue Jun 25, 2024 9:57 am

I found their stuff had lots of settings you could only lower the level slightly didn’t do much, I always had to use sound solution, better off without the compressor, dsp stuff, apparently you can disable the compressor in the 3000, not that helps with the inductor.

Hugh
ne guy
ne guy
Posts: 8
Joined: Wed Mar 15, 2023 9:34 am

Re: PCS SE3000AN+ Revisited

Post by Hugh » Mon Jul 08, 2024 3:04 pm

Thanks Rigmo, I have that manual, no component values on it. No reply yet from PCS Mighty Albert.

Post Reply