PCS SE3000AN+ Revisited
-
- ne guy
- Posts: 8
- Joined: Wed Mar 15, 2023 9:34 am
PCS SE3000AN+ Revisited
Hi Folks, I am servicing one of these doodads at component level, it is a compressor/ low pass filter/ Stereo generator PCB from ~2000. One of 2 inductors in the MPX filter has gone o/c.; the one nearest "Max Link Socket". No markings visible. Does anyone have access to a circuit, what's it's value? Cheers all.
-
- proppa neck!
- Posts: 2957
- Joined: Tue Apr 05, 2016 1:23 am
Re: PCS SE3000AN+ Revisited
Send Mighty (at PCS) an email. He's a friendly guy and will tell you what you need to know.
"Why is my rig humming?"
"Because it doesn't know the words!"
"Because it doesn't know the words!"

-
- ne guy
- Posts: 8
- Joined: Wed Mar 15, 2023 9:34 am
Re: PCS SE3000AN+ Revisited
Thanks Albert, I shall do that.
You've done superb work on compressors Sir.
You've done superb work on compressors Sir.
- rigmo
- proppa neck!
- Posts: 532
- Joined: Wed Jan 30, 2019 9:35 pm
- radionortheast
- proppa neck!
- Posts: 881
- Joined: Wed Sep 09, 2015 1:38 pm
Re: PCS SE3000AN+ Revisited
I found their stuff had lots of settings you could only lower the level slightly didn’t do much, I always had to use sound solution, better off without the compressor, dsp stuff, apparently you can disable the compressor in the 3000, not that helps with the inductor.
-
- ne guy
- Posts: 8
- Joined: Wed Mar 15, 2023 9:34 am
Re: PCS SE3000AN+ Revisited
Thanks Rigmo, I have that manual, no component values on it. No reply yet from PCS Mighty Albert.